Product Description
Your marker can fire thousands of rounds every week, puts up with the beating of countless rainy Sundays, and withstands a number of slides through the dirt and mud. Through all of this, you still expect your marker to perform week in and week out. A small bit of maintenance is key to ensuring that your marker functions and performs at its best. One major aspect of marker maintenance is replacing your o-rings. The o-rings in your marker wear down over time by withstanding thousands of cycles along with coming in contact with dirt/debris. Our kits provide an easy and inexpensive way to keep your marker in top shape by swapping out your o-rings.
O-rings are color coded by size, eliminating the headache of matching up sizes. An included color/size chart helps with your first time rebuilding your marker. After that, just replace o-rings by color when it comes time to rebuild again. All of the o-rings you need to perform a standard rebuild of your marker three times (other quantities available). Contains o-rings for your markers firing assembly, high pressure regulator, LPR (if applicable), etc (unless otherwise noted). Don't be fooled by other kits that only offer a fraction of the o-rings needed to rebuild your marker. 020 (x2) - Can (Outer) 020 - Rear Prop Shaft 017 - Can (Inner) 016 - Reg Swivel 015 - Inline Reg Piston 015 - Inline Reg Top 015 - Bolt Bumper 14x2mm - Middle Prop Shaft 14x2mm - Bolt Rear 013 - Bolt Front 011 - Inline Reg Bottom 011 - Prop Shaft Bumper (Updated) 010 - Prop Shaft Bumper (Original) 008 - Prop Shaft (Inner) 008 - Prop Shaft Adjuster 008 (x2) - Inline Reg Adjuster 008 (x2) - Oops Insert (External) 006 - Body Plug 006 - OOPS Insert (Internal)