Product Description
THIS ITEM IS NO LONGER IN STOCK AND IS LOCATED IN THE PAINTBALL GRAVEYARD. THE MANUFACTURER HAS DISCONTINUED THIS PRODUCT AND THERE IS NO CHANCE OF EVER RECEIVING IT. DO NOT PURCHASE THIS ITEM BECAUSE IT WILL NEVER SHIP OUT TO YOU!!! This section was built to let you read and learn about products from the past.
The Ego Reborn: the poppet-valve marker Redefined.
Every aspect of the Ego LV1 has been reshaped and redesigned to create the ultimate expression of Eclipse passion, performance and quality. There has never been such a complete and thorough overhaul of every facet of the Ego model, no stone left unturned in the pursuit of perfection. As a result the Ego LV1 utilizes technology never before seen in a paintball marker to transform the way it shoots and feels.
Internally the Ego LV1 introduces a revolutionary design that rewrites what can be achieved with this type of platform. The new system incorporates a profiled lever between the rammer and the exhaust valve that is used to separate the action of the rammer and bolt from the action of the valve. This additional element in the mechanism has several major benefits over the conventional knock-open system, particularly in respect to the force required to open the valve and the rate at which the valve is opened. This indirect operation of the valve means it can be opened more slowly, with considerably less force, yet retain excellent seal integrity.
The benefits when shooting? Smaller forces generated by the reciprocating components (bolt and rammer) and a smoother profile of the air released behind the ball which correlates to greatly reduced kick and significantly quieter sound signature. The change is so marked that in terms of feel and sound the Ego LV1 is no longer comparable to other poppet-based markers, but instead finds itself competing with the very best spool operated devices. It has to be seen and shot to fully appreciate the leap forward this system has made.
Yet that is only a small part of the Ego LV1. There are many more improvements throughout the entire marker, from front to back, inside and out. For example the valve itself is a completely new design that offers far superior flow paths through the entire valve chamber; the new LPR is fully integrated into the body of the marker so that it no longer protrudes beneath the barrel; the Zick3 rammer is designed to accelerate much more slowly, to be as gentle as possible as it loads the ball into the barrel; and each LV1 comes complete with two different weight rammers, one for efficiency, one for lower operating pressures; the AT Pipe system removes the need for macroline hose and fittings from the POPS to the inline regulator; the Regulator Sleeve and Crown integrate to provide a stable and ergonomic, non-slip foregrip; the grip and console offer a continuous soft rubber gripping surface around the frame; and the Cure5 bolt incorporates both a detachable soft rubber tip and free-floating transfer post seals.
Of course all this has been achieved without sacrificing the simplicity, reliability and ease of maintenance of a true Eclipse product.
The Ego LV1. The beginning of a new chapter in Ego history.
***NOTE***Please note that this paintball marker has been disassembled and subsequently had parts swapped, or been re-anodised by a company other than Planet Eclipse Ltd. Whilst the marker was factory specification, it must be noted that the marker has been re-assembled by ANSgear.com, which is an Authorized Service Center for Planet Eclipse. The full warranty still applies and all technical and warranty issues should be addressed through the vendor.***NOTE***
Dimensions
Weight – 936g/2.06lb Including 14.5” Shaft4 Barrel, Battery, Feed Tube, POPS
Length – 555mm Including 14.5” 2-piece Shaft4 Barrel
Height – 210mm
Width – 27mm
Materials
Body – 6082-T6 Aluminium
Barrel – 6061-T6 Aluminium
Frame – 6061-T6 Aluminium
Feed – 6061-T6 Aluminium
Eye Covers – 6061-T6 Aluminium
Electronics
User Input – 3 Pushbuttons On Frame, Tourney Lock on PCB
Display – Transflective Graphic LCD Module with Tru-Color Adjustable Backlight
Solenoid voltage – 5V
Processor voltage – 3.3V
Processor – 16-Bit 16MIPS Flash Microcontroller
Power Supply – 1 x 9V (PP3) Battery
PC Interface – E-Portal Compatible
Hardware
ASA Mount – Direct Mount POPS (Push On Purge System)
Trigger Activation Methods – Micro-Switch and Photo-Interrupter Optical Sensor
Trigger Mechanism – Leaf Spring and Magnetic Return
Trigger Pivot – Dual Instrument Ball Race Units Mounted in Bearing Carrier
Barrel – 2-Piece Micro Honed Shaft4 14.5” length 0.689” Bore
Feed Tube – Lever Operated Clamping Feed with Sprocket Thumb Wheel
Pneumatics
Operating Principle – Under and Over Poppet with Lever Valve Mechanism
Solenoid Type – Custom MAC Direct Acting Solenoid Valve
Drive Mechanism – Zick3 Rammer System (Regular and Lightweight Options)
Bolt Mechanism – Cure5 Bolt
Ergonomics
Grip Type – Contoured Dual Density Grip
Grip Pitch – 185mm
Firmware
Firing Modes – Semi and Ramping Capped and Uncapped
Debounce Modes – 10 Debounce Modes plus Custom Tuning
Unique Lever Valve Mechanism Zick3 Rammer System Heavy and Light Zick3 Rammer Included Cure5 Bolt Internal LPR SL4 Inline Regulator AT Pipe Gas Transfer System High Flow Onion Valve Shielded Valve Spring AT POPS 40% Larger Valve Chamber 65-80psi LPR Pressure 120-135psi Inline Pressure Contoured Grip and Console HiGrip Foregrip and Body Sleeve Adjustable Direct Acting Solenoid Valve Dual Rammer Speed Controls Tool-less Bolt, Rammer and Valve Removal 14.5" Shaft4 Barrel with 0.689" Back Infra-Red Break Beam Eyes Replaceable Transflective Graphic LCD Module Adjustable Tru-Colour RGB LCD Backlite 16-Bit Microprocessor - 16 MIPS (Million Instructions Per Second) Improved Solenoid Drive Circuitry for increased Velocity Consistency Menu Driven User Interface Ultra-Lightweight, Single Billet 3D Machined Body (Machined in the UK) Deftek Offset Feed Tube Clamping Feed with Sprocket Wheel Adjustment Integrated Rammer Housing Integrated FRM Offset Bores Micro-Switch and Opto Sensor Trigger Activation Dual Instrument Grade Ball-Raced Trigger Dual Trigger Return Mechanisms - Magnetic and Spring Trigger Integrated Audible Sounding Device Ramping and Semi-Auto Modes Compliant with Regulations of all Major Paintball Leagues E-Portal Compatible Assembled and Tested at Planet Eclipse HQ in the UK
The Ego Reborn: the poppet-valve marker Redefined.
Every aspect of the Ego LV1 has been reshaped and redesigned to create the ultimate expression of Eclipse passion, performance and quality. There has never been such a complete and thorough overhaul of every facet of the Ego model, no stone left unturned in the pursuit of perfection. As a result the Ego LV1 utilizes technology never before seen in a paintball marker to transform the way it shoots and feels.
Internally the Ego LV1 introduces a revolutionary design that rewrites what can be achieved with this type of platform. The new system incorporates a profiled lever between the rammer and the exhaust valve that is used to separate the action of the rammer and bolt from the action of the valve. This additional element in the mechanism has several major benefits over the conventional knock-open system, particularly in respect to the force required to open the valve and the rate at which the valve is opened. This indirect operation of the valve means it can be opened more slowly, with considerably less force, yet retain excellent seal integrity.
The benefits when shooting? Smaller forces generated by the reciprocating components (bolt and rammer) and a smoother profile of the air released behind the ball which correlates to greatly reduced kick and significantly quieter sound signature. The change is so marked that in terms of feel and sound the Ego LV1 is no longer comparable to other poppet-based markers, but instead finds itself competing with the very best spool operated devices. It has to be seen and shot to fully appreciate the leap forward this system has made.
Yet that is only a small part of the Ego LV1. There are many more improvements throughout the entire marker, from front to back, inside and out. For example the valve itself is a completely new design that offers far superior flow paths through the entire valve chamber; the new LPR is fully integrated into the body of the marker so that it no longer protrudes beneath the barrel; the Zick3 rammer is designed to accelerate much more slowly, to be as gentle as possible as it loads the ball into the barrel; and each LV1 comes complete with two different weight rammers, one for efficiency, one for lower operating pressures; the AT Pipe system removes the need for macroline hose and fittings from the POPS to the inline regulator; the Regulator Sleeve and Crown integrate to provide a stable and ergonomic, non-slip foregrip; the grip and console offer a continuous soft rubber gripping surface around the frame; and the Cure5 bolt incorporates both a detachable soft rubber tip and free-floating transfer post seals.
Of course all this has been achieved without sacrificing the simplicity, reliability and ease of maintenance of a true Eclipse product.
The Ego LV1. The beginning of a new chapter in Ego history.
Dimensions
Weight – 936g/2.06lb Including 14.5” Shaft4 Barrel, Battery, Feed Tube, POPS
Length – 555mm Including 14.5” 2-piece Shaft4 Barrel
Height – 210mm
Width – 27mm
Materials
Body – 6082-T6 Aluminium
Barrel – 6061-T6 Aluminium
Frame – 6061-T6 Aluminium
Feed – 6061-T6 Aluminium
Eye Covers – 6061-T6 Aluminium
Electronics
User Input – 3 Pushbuttons On Frame, Tourney Lock on PCB
Display – Transflective Graphic LCD Module with Tru-Color Adjustable Backlight
Solenoid voltage – 5V
Processor voltage – 3.3V
Processor – 16-Bit 16MIPS Flash Microcontroller
Power Supply – 1 x 9V (PP3) Battery
PC Interface – E-Portal Compatible
Hardware
ASA Mount – Direct Mount POPS (Push On Purge System)
Trigger Activation Methods – Micro-Switch and Photo-Interrupter Optical Sensor
Trigger Mechanism – Leaf Spring and Magnetic Return
Trigger Pivot – Dual Instrument Ball Race Units Mounted in Bearing Carrier
Barrel – 2-Piece Micro Honed Shaft4 14.5” length 0.689” Bore
Feed Tube – Lever Operated Clamping Feed with Sprocket Thumb Wheel
Pneumatics
Operating Principle – Under and Over Poppet with Lever Valve Mechanism
Solenoid Type – Custom MAC Direct Acting Solenoid Valve
Drive Mechanism – Zick3 Rammer System (Regular and Lightweight Options)
Bolt Mechanism – Cure5 Bolt
Ergonomics
Grip Type – Contoured Dual Density Grip
Grip Pitch – 185mm
Firmware
Firing Modes – Semi and Ramping Capped and Uncapped
Debounce Modes – 10 Debounce Modes plus Custom Tuning
Unique Lever Valve Mechanism Zick3 Rammer System Heavy and Light Zick3 Rammer Included Cure5 Bolt Internal LPR SL4 Inline Regulator AT Pipe Gas Transfer System High Flow Onion Valve Shielded Valve Spring AT POPS 40% Larger Valve Chamber 65-80psi LPR Pressure 120-135psi Inline Pressure Contoured Grip and Console HiGrip Foregrip and Body Sleeve Adjustable Direct Acting Solenoid Valve Dual Rammer Speed Controls Tool-less Bolt, Rammer and Valve Removal 14.5" Shaft4 Barrel with 0.689" Back Infra-Red Break Beam Eyes Replaceable Transflective Graphic LCD Module Adjustable Tru-Colour RGB LCD Backlite 16-Bit Microprocessor - 16 MIPS (Million Instructions Per Second) Improved Solenoid Drive Circuitry for increased Velocity Consistency Menu Driven User Interface Ultra-Lightweight, Single Billet 3D Machined Body (Machined in the UK) Deftek Offset Feed Tube Clamping Feed with Sprocket Wheel Adjustment Integrated Rammer Housing Integrated FRM Offset Bores Micro-Switch and Opto Sensor Trigger Activation Dual Instrument Grade Ball-Raced Trigger Dual Trigger Return Mechanisms - Magnetic and Spring Trigger Integrated Audible Sounding Device Ramping and Semi-Auto Modes Compliant with Regulations of all Major Paintball Leagues E-Portal Compatible Assembled and Tested at Planet Eclipse HQ in the UK
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov/product