Hello and welcome to the Bob Long Marq Ripper. The Marq Ripper is our flagship Marq and the most exclusive marker now offered by Bob Long Technologies. Included with each Ripper is our professionally proven 2 Piece Tournament Barrel, match anodized with our two most popular .685 and .691 Guide Bores. For those looking to be ready for any paint they may encounter, Bob Long also produces Guide Bores in .679, .682, and .688. We want our Bob Long owner community to be pressure conscious and able to maintain their markers properly. This is the main reason every Marq Ripper includes the ever so handy Gen 2 Marq Pressure Testing Tool. One of the main keys to a good shooting marker is properly setting the operating pressures. Learning about basic maintenance and baseline pressure settings is a must for a happy marker.
Classification: Generation 2 Marq Configuration: Electro-pneumatic. Open bolt. In-line poppet valve. Barrel Thread Type: Autococker Included Barrel: Bob Long 14” Two Piece Tournament with .685 and .691 Guide Bores Included ASA: Gen 2 Marq Cam Drive On-off Intended Propellant: Compressed air or nitrogen only! Intended Propulsion Speed: 230-300FPS (feet per second) HPR Pressure: 190-210psi LPR Pressure: 70-80psi Estimated Shot Count: 1900+ shots (factory settings using 70ci 4500psi air source) Motherboard: Tadao Ryujin 4C Eye Compatible: Yes 4C Eye Equipped: No Estimated Rate of Fire: 28+BPS (4C eye upgrade with board set in ramping mode) Trigger Activation: Micro switch Trigger Return: Spring assist Trigger Adjustment: Travel and Activation Point Weight With Barrel: 2 lb. 1.1oz Weight Without Barrel: 1 lb. 12.6oz