Product Description
Inception Designs Trigger Upgrade
This kit includes:
WGP Delrin Trigger Plate
This is a trigger plate for Inception frames that are to be used with WGP™ body systems (and Inception Retro Series guns) and front blocks (where the 3-way sits lower). This trigger plate has a shorter three way slot and uses a change in angle on the trigger plate ramp to make a short and snappy trigger pull.
Sear Spring Kit
This is the spring that goes under the back of the sear and pushes it up to engage it with the hammer lug.
- Light
- Medium Light
- Medium
- Heavy
On initial install we recommend using the medium trigger return spring and the medium light sear spring.
These are for Autocockers only. Using this trigger plate with a pump gun that has an Autotrigger will result in premature wear and is not covered by warranty.