Product Description
Your marker can fire thousands of rounds every week, puts up with the beating of countless rainy Sundays, and withstands a number of slides through the dirt and mud. Through all of this, you still expect your marker to perform week in and week out. A small bit of maintenance is key to ensuring that your marker functions and performs at its best. One major aspect of marker maintenance is replacing your o-rings. The o-rings in your marker wear down over time by withstanding thousands of cycles along with coming in contact with dirt/debris. Our kits provide an easy and inexpensive way to keep your marker in top shape by swapping out your o-rings.
O-rings are color coded by size, eliminating the headache of matching up sizes. An included color/size chart helps with your first time rebuilding your marker. After that, just replace o-rings by color when it comes time to rebuild again. All of the o-rings you need to perform a standard rebuild of your marker three times (other quantities available). Contains o-rings for your markers firing assembly, high pressure regulator, LPR (if applicable), etc (unless otherwise noted). Don't be fooled by other kits that only offer a fraction of the o-rings needed to rebuild your marker. 007 or 008 - QEV 009 - Solenoid Head 010 - Reg Piston 010 - Bolt Tail 011 - Firebolt O-Ring 014 - Bolt Stop (Inner) 015 - Bolt Bumper 015 - Reg Top 015 (x2) - Swivel Donut 016 - Reg Piston 017 - Rear Breech (Front) 017 - SFT O-Ring 018 - Reg Bottom 020 - Bolt Stop (Outer) 020 - Rear Breech (Rear) 022 - Rear Breech (Middle) 2mm x 16mm - Bolt Sail