Product Description
THIS ITEM IS NO LONGER IN STOCK AND IS LOCATED IN THE PAINTBALL GRAVEYARD. THE MANUFACTURER HAS DISCONTINUED THIS PRODUCT AND THERE IS NO CHANCE OF EVER RECEIVING IT. DO NOT PURCHASE THIS ITEM BECAUSE IT WILL NEVER SHIP OUT TO YOU!!! This section was built to let you read and learn about products from the past.
This kit provides spare o-rings for the common maintenance areas of the marker plus spare screws, springs and detents. See below for description of contents and installation location.
This kit provides spare o-rings for the common maintenance areas of the marker plus spare screws, springs and detents. See below for description of contents and installation location.
Part Qty Location
1x3mm O-Ring 6 Solenoid to Manifold to Body
1x4mm O-Ring 2 Grip Frame to Body
1x4.5mm O-Ring 2 ASA to Grip Frame
1x6.5mm O-Ring 2 LPR to Body
1x7.5mm O-Ring 2 SC Only Outside of Poppet Shaft Rear
1x12mm O-Ring 2 Outside of Blast Guide
1x14mm O-Ring 2 Back Block to Ram Housing
006 O-Ring 8 Outside of Ram Housing
007 O-Ring 4 Outside of Ram Housing(Tight!)
008 O-Ring 4 Ram/ Poppet Shaft
011 O-Ring 2 Rear of Ram
012 O-Ring 2 LPR Piston
013 O-Ring 2 Inside of Ram Housing
014 O-Ring 2 Inside of Front Volume Chamber
015 O-Ring 4 Bolt
016 O-Ring 2 HPR Piston
020 O-Ring 2 Inside of Volume Chamber Rear
021 O-Ring 4 Outside of Volume Chamber
Screw for grip panel 2
Screw for eye board 2
Screw for eye cover 2
Ball detent with spring 2
Trigger spring 1
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov/product